CONVMODE=CONTINUOUS, REFRESHSOURCE=NONE, TRIGMODE=NONE, POWERMODE=HIGHPOWER
No Description
| CONVMODE | Channel 0 Conversion Mode 0 (CONTINUOUS): DAC channel 0 is set in continuous mode 1 (SAMPLEOFF): DAC channel 0 is set in sample/shut off mode |
| POWERMODE | Channel 0 Power Mode 0 (HIGHPOWER): Default is High Power Mode 1 (LOWPOWER): Set this bit for Low Power Mode |
| TRIGMODE | Channel 0 Trigger Mode 0 (NONE): No Conversion Trigger Source Selected for Channel 0 1 (SW): Channel 0 is triggered by Channel 0 FIFO (CH0F) write 2 (SYNCPRS): Channel 0 is triggered by Sync PRS input. PRS Trigger should have the same clock group as VDAC. 3 (LESENSE): Channel 0 is triggered by LESENSE 4 (INTERNALTIMER): Channel 0 is triggered by Internal Timer Overflow 5 (ASYNCPRS): Channel 0 is triggered by Async PRS input |
| REFRESHSOURCE | Channel 0 Refresh Source 0 (NONE): No Refresh Source Selected for Channel 0. 1 (REFRESHTIMER): Channel 0 Refresh triggered by Refresh Timer Overflow 2 (SYNCPRS): Channel 0 Refresh triggered by Sync PRS. PRS Trigger should have the same clock group as VDAC. 3 (ASYNCPRS): Channel 0 Refresh triggered by Async PRS |
| FIFODVL | Channel 0 FIFO Low Watermark |
| HIGHCAPLOADEN | Channel 0 High Cap Load Mode Enable |
| KEEPWARM | Channel 0 Keepwarm Mode Enable |